Cable Measuring

Length Measuring

Mechanical Counters

People Counters

Power Supplies

Counters & Timers

Industrial Control Instruments




British Encoder


Contact Details


DPM350 Digital Panel meter

View Datasheet      


  • 96 x 48 mm DIN standard Housing
  • 3 1/2  Digit LED Dispaly
  • Auto zero
  • Auto Polarity
  • 115/230VAC or 12-28VDC supply
  • Over range indication
  • Selectable decimal point
  • Choice of measurement range
  • Display hold function


Mode of Operation:     This range of instruments provides a simple and accurate method of measuring and displaying voltages and currents in an easy to read digital format. They are available to measure an extensive range of voltages and currents in both AC and DC. Connections are made at the rear of the instrument on a removable 12 way screw terminal block that makes installation very simple.

The large bright LED display is easy to read and the instrument is also available with digit heights from 25 mm to 100 mm in our large display range of instruments.

The decimal point on the display can be selected by connections on the rear panel and the instrument can be scaled using the multiturn calibration control behind the removable front panel. These features enable the unit to display readings in “engineering units” to the users specification.

A “Display Hold” facility is also available by using the rear terminal connections. This fixes the display value at the last value as the connection is made



Measurement ranges:  199.9 millivolts  to 199.9 volts AC and DC

1.999 milliamps to 1.999 Amps AC and DC

Supply: 115/240 VAC or 12 - 30 VDC
Housing:  96 mm x 48 mm DIN standard panel mounting plastic
Dimensions: 96 x 96 x 110 mm
Panel Cutout: 92 x 92 mm
Connections:  Rising cage screw terminals
Order code:    

{type}{supply}{range} i.e.  DPM350-2DC,  DPM350m-4AC




Send mail to info@abtekcontrols.com  with questions or comments about this web site.

Copyright © 2014 Abtek Controls

Visa, Mastercard and Debit cards accepted

Paypal accepted